Advantages:
Predefined force for repeatability
Faster and more precise setups
Reduced risk of runout problems by using too much strength
Reduced risk of damaging nuts and tool holders
Reduced risk of injuries
Pic. 1
Advantages:
Predefined force for repeatability
Faster and more precise setups
Reduced risk of runout problems by using too much strength
Reduced risk of damaging nuts and tool holders
Reduced risk of injuries
Pic. 1
Showing 1 - 15 out of 15
Page 1 out of 1
Part # | Nut | Tool Ø (mm) | Torque (mm) | Length | Ref Pic | Action | |
---|---|---|---|---|---|---|---|
DMS-ER08M | ER08M | 1.0 - 5.0 | 8 | 140 | 1 | ||
DMS-ER11M | ER11M | 3.0 - 7.0 | 18 | 150 | 1 | ||
DMS-ER11MS | ER11M | 1.0 - 2.9 | 9 | 150 | 1 | ||
DMS-ER16M | ER16M | 4.0 - 10.0 | 28 | 150 | 1 | ||
DMS-ER16MS | ER16M | 1.5 - 3.5 | 20 | 150 | 1 | ||
DMS-ER20M | ER20M | 1.5 - 13.0 | 35 | 150 | 1 | ||
DMS-ER25M | ER25M | 4.0 - 17.0 | 40 | 150 | 1 | ||
DMS-UM/ER11 | UM/ER11 | 3.0 - 7.0 | 18 | 150 | 3 | ||
DMS-UM/ER16 | UM/ER16 | 4.0 - 4.5 / 5.0 - 10.0 | 35 / 55 | 340 | 3 | ||
DMS-UM/ER20 | UM/ER20 | 1.5 - 6.5 / 7.0 - 13.0 | 40 / 70 | 350 | 3 | ||
DMS-UM/ER25 | UM/ER25 | 4.0 - 4.5 / 5.0 - 17.0 | 55 / 90 | 390 | 2 | ||
DMS-UM/ER32 | UM/ER32 | 3.0 - 4.5 / 5.0 - 22.0 | 70 / 130 | 395 | 2 | ||
DMS-UM/ER40 | UM/ER40 | 4.0 - 26 | 120 | 450 | 2 | ||
DMS-UX/ER16 | UX/ER16 | 4.0 - 4.5 / 5.0 - 10.0 | 35 / 55 | 340 | 2 | ||
DMS-UX/ER20 | UX/ER20 | 1.5 - 6.5 / 7.0 - 13.0 | 40 / 70 | 340 | 2 |