Guide bushings Tsugami Specific
Guaranteed Runout Accuracy
| Bore (mm) | L1 (mm) | L2 (mm) | Standard | Ultra Precision | Ultra Precision Profile |
|---|---|---|---|---|---|
| 0.5 – 1 | 3 | 3 – 5 | 0.015 mm | 0.01 mm | 0.12 mm |
| 1 – 1.6 | 6 | 5 – 8 | 0.02 mm | 0.01 mm | 0.12 mm |
| 1.6 – 3 | 10 | 8 – 12 | 0.02 mm | 0.01 mm | 0.12 mm |
| 3 – 6 | 16 | 12 – 18 | 0.02 mm | 0.01 mm | 0.12 mm |
| 6 – 10 | 25 | 18 – 24 | 0.02 mm | 0.01 mm | 0.15 mm |
| 10 – 18 | 40 | 24 – 32 | 0.03 mm | 0.01 mm | 0.2 mm |
| 18 – 24 | 50 | 32 – 48 | 0.03 mm | 0.01 mm | 0.2 mm |
| 24 – 30 | 60 | 48 – 60 | 0.04 mm | 0.01 mm | 0.2 mm |
| 30 – 50 | 80 | 60 | 0.04 mm | 0.01 mm | 0.2 mm |
| 50 | 100 | 60 – 70 | 0.04 mm | 0.01 mm | 0.2 mm |
Guide Bushing Options Available
Advantages:
- Wave slots prevent chips from getting into the guide bore
- Extended landings standard
- Ultra precision standard
- Scratch free properties
- Not sensitive to heat and non-abrasive
- Very low friction coefficient
- Concentricity accuracy is the as same as carbide
Visit the Gold Wave Bushing Product Page to view more information.
Advantages:
- Maximum support given to part.
- Shorter processing times are possible during the turning operation.
- Ideal for cutting long threads.
- Carbide lined for higher durability and to keep the barstock clean and unmarked
Visit the Extended Carbide Inserts Product Page to view more information.
Advantages:
- Reduced sliding friction
- Better protection against abrasion
- Very high corrosion-resistance
Advantages:
- Due to the waveform of the slots a scratch-free surface is ensured
- Well-suited to drive square and hexagon material
- Prevents chips and dirt in the bores and slits
- Highest concentric accuracy
- Available for all common types of guide bushes
Advantages:
- High scratch-free surface on the turning parts
- Very low coefficient of friction, ensuring very good sliding properties
- Shape consistency and stability is guaranteed by the steel body
- Concentric accuracy is the same as what the user is used to for a guide bush
- Extends over the entire length of the guide bush
- Not heat sensitive
- Non-abrasive
| Bore (mm) | L1 (mm) | L2 (mm) | Standard | Ultra Precision | Ultra Precision Profile |
|---|---|---|---|---|---|
| 0.5 – 1 | 3 | 3 – 5 | 0.015 mm | 0.01 mm | 0.12 mm |
| 1 – 1.6 | 6 | 5 – 8 | 0.02 mm | 0.01 mm | 0.12 mm |
| 1.6 – 3 | 10 | 8 – 12 | 0.02 mm | 0.01 mm | 0.12 mm |
| 3 – 6 | 16 | 12 – 18 | 0.02 mm | 0.01 mm | 0.12 mm |
| 6 – 10 | 25 | 18 – 24 | 0.02 mm | 0.01 mm | 0.15 mm |
| 10 – 18 | 40 | 24 – 32 | 0.03 mm | 0.01 mm | 0.2 mm |
| 18 – 24 | 50 | 32 – 48 | 0.03 mm | 0.01 mm | 0.2 mm |
| 24 – 30 | 60 | 48 – 60 | 0.04 mm | 0.01 mm | 0.2 mm |
| 30 – 50 | 80 | 60 | 0.04 mm | 0.01 mm | 0.2 mm |
| 50 | 100 | 60 – 70 | 0.04 mm | 0.01 mm | 0.2 mm |