Product was successfully added to quote request.View List
Guide Bushings
Guaranteed Runout Accuracy
Bore (mm) | L1 (mm) | L2 (mm) | Standard | Ultra Precision | Ultra Precision Profile |
---|---|---|---|---|---|
0.5 – 1 | 3 | 3 – 5 | 0.015 mm | 0.01 mm | 0.12 mm |
1 – 1.6 | 6 | 5 – 8 | 0.02 mm | 0.01 mm | 0.12 mm |
1.6 – 3 | 10 | 8 – 12 | 0.02 mm | 0.01 mm | 0.12 mm |
3 – 6 | 16 | 12 – 18 | 0.02 mm | 0.01 mm | 0.12 mm |
6 – 10 | 25 | 18 – 24 | 0.02 mm | 0.01 mm | 0.15 mm |
10 – 18 | 40 | 24 – 32 | 0.03 mm | 0.01 mm | 0.2 mm |
18 – 24 | 50 | 32 – 48 | 0.03 mm | 0.01 mm | 0.2 mm |
24 – 30 | 60 | 48 – 60 | 0.04 mm | 0.01 mm | 0.2 mm |
30 – 50 | 80 | 60 | 0.04 mm | 0.01 mm | 0.2 mm |
50 | 100 | 60 – 70 | 0.04 mm | 0.01 mm | 0.2 mm |
Guide Bushing Options Available
Gold Wave
Extended Carbide Inserts
Raco-Morph Coated
Wave Slots
Polymer Insert
Advantages:
- Wave slots prevent chips from getting into the guide bore
- Extended landings standard
- Ultra precision standard
- Scratch free properties
- Not sensitive to heat and non-abrasive
- Very low friction coefficient
- Concentricity accuracy is the as same as carbide
Visit the Gold Wave Bushing Product Page to view more information.
Advantages:
- Maximum support given to part.
- Shorter processing times are possible during the turning operation.
- Ideal for cutting long threads.
- Carbide lined for higher durability and to keep the barstock clean and unmarked
Visit the Extended Carbide Inserts Product Page to view more information.
Advantages:
- Reduced sliding friction
- Better protection against abrasion
- Very high corrosion-resistance
Advantages:
- Due to the waveform of the slots a scratch-free surface is ensured
- Well-suited to drive square and hexagon material
- Prevents chips and dirt in the bores and slits
- Highest concentric accuracy
- Available for all common types of guide bushes
Advantages:
- High scratch-free surface on the turning parts
- Very low coefficient of friction, ensuring very good sliding properties
- Shape consistency and stability is guaranteed by the steel body
- Concentric accuracy is the same as what the user is used to for a guide bush
- Extends over the entire length of the guide bush
- Not heat sensitive
- Non-abrasive
Showing 1 - 38 out of 38
Page 1 out of 1
Part # | ØD | Ød2 | E-Number | Thread | L | K | Diameter Up / To | Specify size | Action | |
---|---|---|---|---|---|---|---|---|---|---|
|
0201 / F605
|
29.5
|
24
|
F 605
|
M 24 X 1
|
61
|
30°
|
2.0 - 17.0
|
|
|
|
CD25
|
41
|
34
|
T 227
|
M 34 X 1
|
87.5
|
10°
|
3.0 - 25.0
|
|
|
|
F 104
|
24
|
20
|
F 104
|
M 20 X 1
|
55
|
30°
|
2.0 - 13.0
|
|
|
|
F 351
|
13
|
9
|
F 351
|
M 8 X 0.6
|
50
|
30°
|
0.7 - 5.5
|
|
|
|
F 352
|
15
|
11
|
F 352
|
M 10 X 0.6
|
50
|
30°
|
1.0 - 7.5
|
|
|
|
F 853
|
21.8
|
18
|
F 853
|
M 16 X 1
|
61
|
30°
|
1.0 - 13.0
|
|
|
|
F 854
|
48
|
40
|
F 854
|
M 36 X 1
|
71
|
30°
|
3.0 - 26.0
|
|
|
|
FMCRA165
|
24
|
18
|
FMCRA165
|
M 18 X 1
|
68
|
36°
|
0.5 - 13.0
|
|
|
|
FMCRD143
|
17
|
13
|
FMCRD143
|
M 13 X 1
|
68
|
36°
|
0.5 - 8.0
|
|
|
|
FTOP 100
|
22
|
18
|
FTOP 100
|
M 18 X 1
|
100
|
36°
|
1.0 - 13.0
|
|
|
|
FTOP 200
|
42.3
|
34
|
FTOP 200
|
M 32 X 1.5
|
150.3
|
20°
|
2.0 - 20.0
|
|
|
|
I 352
|
14.5
|
11
|
I 352
|
M 10 X 0.8
|
53
|
16°
|
1.0 - 7.5
|
|
|
|
ML 36
|
51
|
44
|
ML 36
|
M 42 X 1
|
82
|
16°
|
3.0 - 35.0
|
|
|
|
PD4
|
12.5
|
9
|
I 351
|
M 8 X 0.75
|
44
|
16°
|
0.7 - 6.0
|
|
|
|
S20HGB
|
-
|
30
|
S20HGB
|
M28 X 1
|
70
|
16°
|
Special Order
|
|
|
|
SD125R
|
21.8
|
18
|
SD125R
|
M18 X 1
|
60
|
30°
|
3.0 - 13.0
|
|
|
|
SL 38
|
52
|
46
|
SL 38
|
M 45 X 1
|
82
|
16°
|
3.0 - 38.0
|
|
|
|
SNC15
|
24
|
21
|
T 221
|
M 18 X 1
|
57.5
|
12°
|
3.0 - 15.0
|
|
|
|
STM38
|
54
|
48
|
T 248
|
M 46 X 1
|
82
|
16°
|
2.0 - 38.0
|
|
|
|
T 223S
|
34
|
28
|
T 223S
|
M 27 X 1
|
82
|
16°
|
21.0 - 23.0
|
|
|
|
T 229S
|
49
|
42
|
T 229S
|
M 42 X 1
|
82
|
16°
|
30.0 - 36.0
|
|
|
|
T 245
|
52
|
45
|
T 245
|
M 42 X 1
|
82
|
16°
|
2.0 - 35.0
|
|
|
|
T 249
|
54
|
48
|
T 249
|
M 46 X 1
|
81
|
10°
|
2.0 - 38.0
|
|
|
|
TD 26
|
29
|
26
|
TD 26
|
M 25 X 1
|
77
|
16°
|
2.0 - 20.0
|
|
|
|
TD10
|
20.5
|
16
|
I 353
|
M 14 X 1
|
59
|
16°
|
1.0 - 12.0
|
|
|
|
TD20
|
29
|
22
|
I 354
|
M 19 X 1
|
68
|
16°
|
2.0 - 16.0
|
|
|
|
TD20R
|
29
|
22
|
F 391
|
M 22 X 1
|
68
|
16°
|
3.0 - 18.0
|
|
|
|
TD25
|
38
|
28
|
I 357
|
M 25 X 1
|
81
|
30°
|
3.0 - 21.0
|
|
|
|
TD25NS
|
34
|
28
|
TD25NS
|
M 25 X 1
|
82
|
16°
|
3.0 - 21.0
|
|
|
|
TD25S
|
34
|
28
|
T 223
|
M 25 X 1
|
82
|
16°
|
3.0 - 21.0
|
|
|
|
TD26
|
29
|
26
|
TD26
|
M25 X 1
|
77
|
16°
|
2,0 - 20,0
|
|
|
|
TD32
|
49
|
42
|
TD32
|
M 40 X 1
|
82
|
20°
|
4.0 - 32.0
|
|
|
|
TD32S
|
49
|
42
|
T 229
|
M 40 X 1
|
82
|
16°
|
3.0 - 32.0
|
|
|
|
TD38
|
53
|
46
|
T 246
|
M 45 X 1
|
92
|
16°
|
2.0 - 38.0
|
|
|
|
TD7
|
14.5
|
11
|
F3001
|
M 10 X 0.75
|
53
|
16°
|
1.0 - 7.0
|
|
|
|
TSD20
|
39
|
32
|
F 355
|
M 32 X 1
|
71
|
30°
|
3.0 - 22.0
|
|
|
|
TSG 20 R
|
28
|
23
|
TSG 20 R
|
M 22 X 1
|
72
|
16°
|
3.0 - 16.0
|
|
|
|
TSG20R
|
-
|
23
|
TSG20R
|
M22 X 1
|
72
|
16°
|
Special Order
|
|