Double-Cone Collet
Advantages:
- Clamping Range +0.2 mm up to -0.8 mm
- Chip cover cap if technically possible, depends on type and ø
- This Alloy is not heat sensitive and very hard – non-abrasive
- High runout accuracy
- Prevents cold shut and friction between Material and guide bush
- Square and hexagon profiles are also available
- Special profiles according to you drawing can be eroded
- Suitable for all pneumatic guide-bush-systems
Also available in grey cast iron and nitrided steel.
Select item(s) below to request a quote:
Chip Cover Cap Mounting
| Collet Part # | Mounting Type |
|---|---|
| DKBB2435 ø 1,0 – 7,0 mm | Screwed |
| DKBB2435 ø 7,1 – 10,0 mm | Riveted |
| DKBB2435 ø 10,1 – 16,0 mm | Without chip cover cap |
| DKBB2840 ø 1,0 – 11,0 mm | Screwed |
| DKBB2840 ø 11,1 – 14,0 mm | Riveted |
| DKBB2840 ø 14,1 – 20,5 mm | without chip cover cap |
| DKBB3340ø 1,0 – 15,0 mm | Screwed |
| DKBB3340 ø 15,1 – 19,0 mm | Riveted |
| DKBB3340 ø 19,1 – 26,0 mm | without chip cover cap |
| DKBB4250ø 1,0 – 23,0 mm | Screwed |
| DKBB4250 ø 23,1 – 34,0 mm | without chip cover cap |
| DKBB4860ø 1,0 – 29,0 mm | Screwed |
| DKBB4860 ø 29,1 – 40,0 mm | without chip cover cap |
Spare springs for collets
All Springs come in a 10 PACK
| Spring Part # | Collet |
|---|---|
| DKZZFEDER1 | DKBB2435 |
| Till ø 18,0: DKZZFEDER2/From ø 18,10: DKZZFEDER1 | DKBB2840 |
| Till ø 24,0: DKZZFEDER2/ From ø 24,10: DKZZFEDER1 | DKBB3340 |
| Till ø 29,5: DKZZFEDER4/ From ø 29,60: DKZZFEDER2 | DKBB4250 |
| Till ø 35,0: DKZZFEDER4/ From ø 35,10: DKZZFEDER2 | DKBB4860 |