Technical information – Cutting Tools

iSwiss systematic boring tools provides higher precision and premium quality. This is perfect for precision machining and it helps reducing labor cost and increasing productivity.

iSwiss Boring Tools Series

Tool locking procedure

Experience the Simplicity of our 3-Step Secure Locking Process.

Find the correct angle, align the tool accordingly, and fully insert it.

Gently tighten the rear screw.
Securely fasten the front screw.
Ensure the rear screw is securely tightened.

Our Tools are easy to lock and can be changed without removing the holders.

Understanding Reference Plane

To facilitate easy tool change, regardless of the brands and different machine types, we designed two types of reference planes.

Tools Identification

To facilitate easy tool change, regardless of the brands and different machine types, we designed two types of reference planes.

Feed F and cutting speed Vc

Material Group per ANSI	Feedrate	Cutting Speed
P1 Steel < 500 N/mm²	.0012 - .0032 IPR	200 - 400 SFM
P2 Steel 500-700 N/mm²	.0012 - .0032 IPR	200 - 330 SFM
P3 Steel 600-800 N/mm²	.0012 - .0032 IPR	230 - 400 SFM
M2 Stainless steel < 750 N/mm²	.0012 - .0032 IPR	160 - 260 SFM
M3 Stainless steel < 850 N/mm²	.0012 - .0032 IPR	160 - 260 SFM
M4 Stainless steel < 950 N/mm²	.0012 - .0032 IPR	160 - 260 SFM
N1 Aluminium alloys ≤ 12% Si	.0012 - .0032 IPR	330 - 500 SFM
N2 Aluminium alloys > 12% Si	.0012 - .0032 IPR	330 - 500 SFM
N4 Bronze and brass	.0012 - .0032 IPR	330 - 500 SFM
H1 Hardened steel 35-45 HRC	.0012 - .0032 IPR	160 - 260 SFM
H3 Hardened steel 52-62 HRC	.0012 - .0032 IPR	160 - 260 SFM

iSwiss Boring Tool Holders

Holders Classification

D Type

Direct Toolholders – BJA

B Type

Butterfly Toolholders

E Type

Easy Toolholders – BJAS

F Type

Flash Toolholders

BJZ
BJZN

S Type

Special Toolholders – Based on your machine type, we can design customized holders to meet your demand.