F37M10 Cartridge

masa-tool-microconic-f37m10 cartridge

The push type F37M10 Cartridge replaces the standard TF37 collet in your CNC spindle. This enables you to use our Microconic collets to achieve concentricity guaranteed to be within 5µm (0.0002″) in production use.

The F37M10 Cartridge is a micro-workholding system for use in high precision, small diameter CNC turning applications which enables you to move more work to the sub spindle operations and reduce cycle time.

​Compatible with spindles that accept DIN 1536E, Meister Swiss 563, Schaublin F37 (76-740), Southwick & Meister TF37, KEB (MasWerks) MC37, Hardinge TF37 / 4619 collets.

Holding Power:

Masa’s Cartridge and Collet assembly is designed to vector the chucking force directly over the holding surface. This means that the chucking force can be reduced while at the same time the holding power is increased. This opens up the possibility of moving part operations to the sub-spindle and dramatically reducing cycle time. 20% ~ 40% cycle time reduction is commonly achieved.

masa-tool-microconic-f37m10 cartridge

F37M10 Features

  • Solid extended nose, giving superior access for tooling and coolant, with minimal overhang.
  • The cartridge’s core diameter is a single-piece construction that will maintain 5 µm/.0002″ concentricity at the extended nose tip.
  • Micrometer dial control of collet clamping pressure regardless of the machine’s hydraulic or pneumatic collet closing force with the use of our Micrograd™ Wrench. See below for more details.
  • Ideally suited for small diameter part size range from .2mm/.008″ to 10mm/.3934″ diameter
  • 2-days shipping on all cartridges and collets.
masa-tool-microconic-f37m10 cartridge

F37M10 Compatibility

Fits any machine that uses collet type TF37, F37 76-740, or DIN 1536E, including the following models and many others:

  • Citizen Models: A32, C32, E232, E32, FL32, G32, L32, M32
  • Hanwha Models: SL32HP
  • KSI Models: SA32
  • Maier Models: ML-32A/32B, ML-32C/32D, ML-32E, MLK-32
  • NexTurn Models: SA32
  • Star Models: ECAS 32, 32T, JNC25/32, KNC25/32B, KNC32, SR32/SR32J, SST16 STM32, SV32, SV32J/32J II, VNC32
  • Tornos Models: DECO 2000 25/32, MR32
  • Tsugami Models: NP32 II, NP32 III, NT25, NT32/ II/ III, SS32, BO325II, 326II, 327II
  • Methods CAM Models: SS32
  • Tornos CAM Models: MR32

Chucking force directly over the chucking surface

  • Reduces the need for excessive force to hold the work piece.
  • Significantly reduces chucking damage on the work piece.
  • Thin wall chucking is now possible without crushing the part.

Reduces “micro-movement” of the workpiece which means

  • Longer tool life
  • Better finishes
  • Chatter problems are less likely
  • Less damage to the work-piece

More operations can be done in the sub-spindle

  • Eliminate secondary operations.
  • Reduce labor/downtime/changeover/set-up costs significantly.
  • Saves time due to overlapping machining in the main spindle.

Part features that were not possible to machine before are now possible in the subspindle.

  • Broaching
  • Milling
  • Saw Cutting/Slotting
  • Turning
  • Boring
  • Drilling

Collets for the F37M10 Cartridge

Micrograd Face Dial Wrench

Set ups are quicker and more repeatable with Microconic. You can document the micrometer-adjust collet closure in your set up plan so it’s done the same every time, regardless of operator skill and without relying on “feel”.

Micrograd Face Dial Wrench is included with the purchase of any Microconic Cartridges.

The Micrograd Face dial Wrench provides a method of precisely setting clamping pressure on both the Microconic collets and an Microconic overgrip collets. It can be adjusted in metric increments of 0,02mm and imperial increments of .001″

F37M10 -E – Inch version graduations on the MicroGrad dial wrench included with each cartridge.

F37M10 -M – Metric version graduations on the MicroGrad dial wrench included with each cartridge.

Microconic system ships within 2 days of order.

Showing 1 - 2 out of 2

Page 1 out of 1

Part # Description Action
F37M10-E
Microconic UM10 Cartridge For TF37, Inch Graduations; Includes CW10-E, HSD15
F37M10-M
Microconic UM10 Cartridge For TF37, Metric Graduations; Includes CW10-M, HSD15